Advanced Energy Industries, Inc. (NASDAQ:AEIS) Q3 2023 Earnings Conference Call October 31, 2023 4:30 PM ET
Company Participants
Edwin Mok – VP, Strategic Marketing and IR
Steve Kelley – President and CEO
Paul Oldham – CFO
Conference Call Participants
Jim Ricchiuti – Needham & Company
Krish Sankar – TD Cowen
Steve Barger – KeyBanc Capital Markets
Mehdi Hosseini – SIG
Mark Miller – Benchmark
Pavel Molchanov – Raymond James
Operator
Greetings. Welcome to the Advanced Energy’s Third Quarter 2023 Earnings Call. At this time, all participants are in listen-only mode. A question-and-answer session will follow the formal presentation. [Operator Instructions]. Please note, this conference is being recorded.
At this time, I’ll turn the conference over to Edwin Mok, Marketing and Investor Relations. Mr. Mok, you may begin.
Edwin Mok
Thank you, operator. Good afternoon everyone. Welcome to Advanced Energy third quarter 2023 earnings conference call. With me today are Steve Kelley, our President and CEO; and Paul Oldham, our Executive Vice President and CFO.
Before I begin, I’d like to mention that we will be participating in several investor conferences. If you have not seen our earnings press release and presentation, you can find them on our website at ir.advancedenergy.com.
Let me remind you that today’s call contains forward-looking statements that are subject to risks and uncertainties that could cause actual results to differ materially and are not guarantees of future performance. Information concerning these risks can be found in our SEC filings.
All forward-looking statements are based on management’s estimates as of today, October 31st, 2023, and the company assumes no obligation to update them. Any targets beyond the current quarter presented today should not be interpreted as guidance.
On today’s call, our financial results are presented on a non-GAAP financial basis, unless otherwise specified. Excludes our non-GAAP results are stock compensation, amortization, acquisition-related costs, facility expansion and related costs, restructuring charges and unrealized foreign exchange gain or losses. A reconciliation between GAAP and non-GAAP measures can be found in today’s press release.
With that, let me pass the call to our President and CEO, Steve Kelley.
Steve Kelley
Thanks Edwin and thanks for joining the call today. We delivered solid results in the third quarter with earnings at the high end of our guidance range on slightly lower revenue.
We delivered record operating cash flow of $73 million, benefiting from improved operating margin, effective inventory control measures, and execution of our cost control initiatives.
In a more challenging demand environment, we continue to deliver solid profitability and cash flow. Our strong financial performance through the business cycle gives us the freedom to invest in new products and technologies as well as improvements in manufacturing efficiency. We expect that these investments will drive future revenue growth and market share gains.
We continue to make great progress on the new product front. Year-to-date, we have launched 19 new products across our markets. In addition, we have expanded our quick-turn customization activity, which enables us to quickly adapt our products to the particular needs of our customers.
In our targeted markets, we are experiencing strong design win momentum in a variety of high-value applications. We continue to expect a record number of design wins in 2023, building a solid foundation for growth.
To improve our operational efficiency, we are working to optimize our factory footprint with the goal of consolidating nearly all of our manufacturing into highly efficient large-scale factories.
As part of that ongoing effort, we are closing two smaller factories in the current quarter. This is in addition to the Shenzhen factory closure we completed last December.
Last month, we broke ground for our new flagship factory in Thailand. Construction will start next year and we expect the facility to ramp in 2025. This new Thailand factory, together with our large factories in the Philippines, Malaysia, and Mexico, will provide the capacity to meet our future needs.
Supply chain issues continue to abate and are no longer a significant constraint on revenue. There are still components with very long lead-times, such as power MOSFETs, but we think that supply will catch up with demand in the coming months.
Now, I’ll provide further color on each of our markets. In semiconductor, third quarter revenue increased sequentially to $185 million. We saw increased demand for RF products used in etch and deposition applications. In addition, we achieved record revenue for our high-voltage products, which are used primarily in ion implanters.
Service revenue decreased sequentially due to lower fab utilization. For the year 2023, however, we expect to set a service revenue record based on our larger installed base and a richer menu of value-added services.
We continue to work closely with our key customers to design in our next generation eVerest and eVoS platforms. We have received numerous orders for these recently launched platforms and are working hard to satisfy the near-term demands of our customers.
We believe that eVerest and eVoS will enable our customers to more effectively overcome the technical challenges of sub 2-nanometer processes. These new technology platforms have the potential to drive meaningful revenue growth for many years to come.
Moving to Industrial and Medical. Third quarter revenue was $115 million, down sequentially following several record quarters. Revenue came in slightly below our plan, due primarily to softer market conditions late in the quarter.
We launched five new products into the Industrial, Medical market, including the iHP-Liquid, a fully sealed liquid cooled power supply, designed to operate in harsh manufacturing environments. In the Industrial market, we secured notable design wins across robotics, factory automation and thin film manufacturing applications.
Our medical design win activity was particularly strong in the third quarter with significant wins in diagnostic and therapeutic applications. In August, we launched the new Advanced Energy website, creating the content for this website was a company-wide effort and we are pleased with the quality and ease of use of our new site. We expect the new website will enable us to reach a much wider cross-section of Industrial and Medical customers.
In early 2024, we will add e-commerce capability to the website, providing another way for our customers to order and rapidly evaluate our products. Overall, we believe that our design win pipeline and improved go-to-market strategy should partially offset the potential impact of macroeconomic softening.
In data center computing, third quarter revenue increased sequentially to $68 million as expected. Strong revenue from the ramp of a hyperscale design win for AI applications offset lower sales to enterprise customers. Telecom and Networking revenue decreased sequentially to $41 million, in line with our expectations.
Now, let me share a few closing thoughts. At the beginning of 2023, we expected that semiconductor revenues will be down year-on-year that the rest of our business will be flat to up.
We also said that our semiconductor business would trough in the second quarter, largely how things have played out in 2023, despite a softer macroeconomic environment in the second half of the year.
Looking forward, we will continue to move full speed ahead, executing the strategy we first articulated two years ago. New products and technologies, more aggressive go-to-market strategy, and improved manufacturing efficiency will remain our primary areas of focus.
With our recently completed convertible note offering, we have secured low-cost financing, which can potentially accelerate our growth. We continue to look for M&A opportunities, which make strategic and financial sense for the company.
Leveraging a broad offering of highly differentiated products, a record number of design wins, improved manufacturing efficiency, and a strong balance sheet, we believe that Advanced Energy is well-positioned to grow faster than our markets.
Paul will now provide detailed financial information.
Paul Oldham
Thank you, Steve and good afternoon everyone. Q3 was a quarter of solid execution with earnings that came in at the high end of our guidance on slightly lower revenue. We saw some demand softening late in the quarter, largely due to macroeconomic factors. However, actions we took to improve our operations and control discretionary spending enabled us to deliver sequentially higher gross and operating margins.
Together with higher interest income and lower taxes, earnings increased 16% sequentially on 1% lower revenue. Importantly, operating cash flow was at the highest level ever for the company.
Finally, with shortened lead-times, customers are adjusting their order patterns and our backlog came down to $514 million. We continue to expect our backlog will settle to a level of $400 million to $500 million by the end of the current quarter.
Overall, despite a softer demand environment, we believe the year is shaping up as we had expected. We are focused on driving new product activity and improving our cost structure, while preparing for the next upturn.
Now, let’s review our financial results in more detail. Total revenue was $410 million, down 1% sequentially and 21% from our peak quarter a year ago. Revenue in the semiconductor market was $185 million, up 7% quarter-over-quarter consistent with our view that Q2 was a near-term bottom.
Revenue in the Industrial and Medical market was $115 million, down 10% from last quarter and 4% year-over-year. Following several quarters of record results, Industrial and Medical saw some softening in demand late in the quarter. Looking forward, we expect incremental revenues from prior design wins to largely offset the impact of a sluggish macroeconomic environment in Q4.
Data Center computing revenue was up 16% sequentially to $68 million, due to the ramp of a hyperscale customer for AI applications. Sales declined 22% year-over-year, due to the cyclical downturn in the enterprise server market.
Telecom and Networking revenue at $41 million, was down 36% sequentially and 3% year-over-year as we fulfilled overdue backlog.
Q3 gross margin was 36.1%, up 50 basis points from Q2 on lower volume as we benefited from improved mix and lower material costs. Premiums we paid for critical components continued to taper.
As costs from prior quarters rolled through inventory to the P&L, we expect to see the full benefits of lower premiums in the first half of 2024. We also continue to take actions to optimize our operations footprint and manufacturing efficiency. Consolidating capacity into larger, more efficient factories should contribute to higher gross margins over the course of 2024.
Operating expenses were $97.3 million, down from last quarter. OpEx was below our guidance as we managed our cost structure and controlled discretionary spending. Q3 operating margin was 12.4%, up 50 basis points sequentially, depreciation was $9.7 million, and our adjusted EBITDA was $61 million.
Non-GAAP other income was $1.3 million, due to higher net interest income, partially offset by foreign exchange losses. Looking forward, we expect our non-GAAP other income to be in the range of $3 million to $3.5 million for the next few quarters, given our level of cash and current interest rates.
As a reminder, in the fourth quarter of 2022, we initiated a restructuring plan to optimize our manufacturing operations. We are on track to our plan and expect to see the benefits of our actions, translating to better margins over the course of 2024. Consistent with this plan, we recognized $5 million in restructuring costs in Q3 and expect to incur an additional $5 million to $8 million in the fourth quarter.
Our non-GAAP tax rate was 7.2%, below our Q3 target of 17%, due to discrete benefits related to tax strategies we implemented this quarter to lower our tax rate. As a result of these strategies, we are now modeling our Q4 and 2024 GAAP and non-GAAP tax rate at around 16%.
Third quarter EPS of $1.28 was at the high end of our guidance of $1.15 and above Q2 of $1.11, but down from $2.12 a year ago. If you apply our prior target tax rate of 17%, Q3 EPS would have been $1.15.
Turning now to the balance sheet. Total cash and marketable securities at the end of the third quarter were $986 million and included approximately $482 million in net proceeds from transactions, associated with our 2.5% convertible senior notes offering that we completed in September.
Operating cash flow from continuing operations was a record $72.7 million. Excluding the convertible offering and related transactions, cash increased from $455 million to $504 million.
Net cash at the end of the third quarter was $66 million. Inventory decreased to $28 million, down 7% sequentially and 11% year-over-year, as actions to monetize on-hand inventory started to contribute to cash flow. As a result, inventory days decreased from 132 in Q2 to 125 in Q3 and turns improved from 2.7 times to 2.9 times.
Days payable decreased two days sequentially to 48 days and DSO increased three days to 59 days. Net working capital was 136 days.
CapEx was $13 million or 3.2% of sales and below our near-term target of approximately 4%. We continue to expect our CapEx for this quarter and the next year to remain around 4% of sales, which includes the cost of our manufacturing consolidation plan and the investment in the new Thailand factory.
During the quarter, we made debt principal payments of $5 million and paid $3.8 million in dividends. Finally, as part of the convertible note offering, we used $40 million to repurchase 370,000 shares of our common stock.
Now, let’s turn to our guidance. Consistent with our commentary from last quarter, we expect that second half semiconductor revenue will be flat to up versus the first half. For our non-semiconductor markets in aggregate, we continue to expect 2023 revenue to grow slightly from last year with low double-digit growth in Industrial and Medical and Telecom and Networking, offset by cyclical weakness in Data Center. However, looking forward, we expect Telecom and Networking revenues to continue to normalize towards $30 million a quarter over the next couple of quarters.
As a result, we are forecasting our Q4 revenue at $405 million, plus or minus $15 million. We expect Q4 gross margin to be similar to Q3 on slightly lower volume. We expect Q4 operating expenses to be about flat with Q3 with timing of investments in new products, offset by other cost reductions. Based on a tax rate of 16%, we expect Q4 non-GAAP earnings per share to be $1.15, plus or minus $0.20.
Let me make a few concluding comments. Overall, we are executing our plans for 2023. Our diversification strategy is enabling us to mitigate the impact of a sluggish macroeconomic environment and ongoing corrections in some of our markets. We continue to expect to perform better than our markets and significantly better than in previous semiconductor cycles.
Looking forward to 2024, we expect semiconductor revenues to continue to bounce around these levels for the next few quarters, but are prepared for upside if the market recovers sooner.
We expect performance in our other markets to be paced by macroeconomic factors, timing of customer orders in hyperscale, and normalization of revenue levels in Telecom and Networking, all partially offset by opportunities for growth from new products and channel investments.
In the meantime, we are focused on improving gross and operating margins, while investing in critical programs to prepare for the next cyclical upturn. We believe our actions to control costs, improve operational efficiency, and shift mix towards higher-margin products position the company to reach our long-term gross margin target of over 40%.
Finally, with solid operating cash flow and a strong cash position, we have financial flexibility and multiple paths to create value for our shareholders.
With that, let’s take your questions. Operator?
Question-and-Answer Session
Operator
Thank you. At this time, we’ll be conducting a question-and-answer session. [Operator Instructions]
And our first question today comes from the line of Jim Ricchiuti with Needham & Company. Please proceed with your question.
Jim Ricchiuti
Hi, good afternoon. I wanted to pursue the areas of the I&M business where you’ve seen some softness. I wonder if you could just maybe expand on that. And then conversely, just as you talk about some of the recent design win activity you’ve had there, where you see some pickup potentially offsetting some of this weakness?
Steve Kelley
Yes Jim, this is Steve. We saw a little bit of weakness in I&M towards the end of the quarter. We actually had orders to fulfill our forecast, but we weren’t able to get the kits together in time to ship in Q3.
And so what we’re at now is more of a short lead-time environment. So, we don’t have a long-term backlog like we did for much of the past year. And so it’s really on us to try to scramble and meet the needs of our customers in the short-term. That said, looking at Q4, it will be about the same as Q3 for Industrial and Medical.
As we look forward into 2024, again, it’s a short lead-time environment. So, our visibility is somewhat more limited as we look into next year. And I think one of the nice things about I&M, or Industrial and Medical is that there are many different submarkets, each with their own dynamics and some are up and others are down.
What we see right now is probably the strongest verticals in I&M include the factory automation, the [indiscernible] segment, solar and thin film, and on the medical side, therapeutic and diagnostic type applications. I think the weakest areas right now are probably test and measurement because that’s tied into semiconductor and probably some of the horticulture applications have slowed down as well.
Maybe just a little more color on our Industrial and Medical. This is the one area where we sell a fair amount of product through distribution. So, roughly 45% of our I&M business goes through distributors.
And so we track that inventory and the resale information pretty closely. And I can tell you, as we exited Q3, we had a little less than three months of inventory in the channel, and that’s a very comfortable place for us. And the resales have actually increased each quarter in 2023. So, we think we’re in pretty good shape in the distribution channel.
The other thing I might just like to note is Industrial and Medical is a fairly new area for us, a new area to focus on, at least, and we’ve been doing it for the last two years. And I think it’s making a difference. We’re seeing some of the effort we put into it turn into wins and some of those wins have turned into revenue.
And the other positive data point is on the customization side, which I mentioned during the call, we’re seeing record turnover in the customization area. And so those two aspects where we put more focus on I&M and also doing more customization work to counteract any macroeconomic issues we face in the general market.
Jim Ricchiuti
Got it. That’s helpful color Steve. My follow-up question, and I realize you’re not going to be able to be very specific. But with respect to the M&A pipeline, how much activity are you seeing in the I&M area of the business? And if you were to maybe be a little bit more specific as to whether you see more opportunities or would prefer one area versus the other in terms of where you’d like to focus on the resources?
Steve Kelley
Yes. So, first, let me just start with the general approach to M&A that we have, and then I’ll zero-in on Industrial and Medical. So, I think, first of all, we’re fortunate that we’re a consistent cash generator even in down cycles, we generate a lot of cash. So, it gives us the ability to make strategic investments and to go on the hunt for acquisitions.
So, the types of targets we’re looking for are going to be primarily in the Industrial and Medical space. We’re looking for targets that are a good strategic fit, that are clearly accretive from a financial standpoint, and have a reasonable payback period.
We look for companies with strong technology and/or a solid product portfolio, preferably with a significant percentage of revenue coming from sole-source products similar to our portfolio and we look for long life cycle products and technologies.
So, within Industrial and Medical, we are looking for larger acquisitions, if possible. And we intend to integrate those acquisitions quickly, like we did last year with SL Power. I think that acquisition worked out pretty well for us, very complementary portfolios and helped us a lot in the medical area in particular.
I think the biggest hurdles we’re looking at now in M&A are just valuations. These valuations are influx and so it’ll probably take longer than we would expect to get a deal done.
But I think the important thing to realize is we’re not in a rush to make a deal. So, we’re going to maintain financial discipline. But we got nearly $1 billion sitting on our balance sheet. So, we have a lot of dry powder and I think we’re an attractive acquirer.
Jim Ricchiuti
Thanks very much. I’ll jump back in the queue. Thank you.
Steve Kelley
Thank you, Jim.
Operator
Our next question is from the line of Krish Sankar with TD Cowen. Please proceed with your question.
Krish Sankar
Yes, hi. Thanks for taking my question. I have two of them. First one, maybe a two-part question on semi. Paul or Steve, you said semi revenues bounce on this level, so is it fair to assume flattish sequentially for December?
And then along the same path, Steve, you mentioned that the semi revenue grew strong in ion implant, not dep and etch. And it seems like ion implant is more levered to mature technologies in silicon carbide. If that is true, can you help us understand how much of your semi revenue or even ion implant came from mature versus compound semi? And then I have a follow-up.
Steve Kelley
Sure. I’ll start and you can finish Paul. So basically, what we see in the entire year Krish is there has been weakness in the etch and dep market. The overall volume has been weak, and that’s well known. We’ve been able to offset some of that weakness in three ways. One was with our service business, which has been very robust this year; the second is with design wins, which have been ramping; and the third is in the high-voltage area.
And your specific question about high-voltage and where it’s used? It is primarily ion implanters and to the best of my knowledge, the vast majority of that is going for mature technologies, silicon carbide as well as silicon technologies. It’s there to meet the surge for high-voltage technologies or for EVs and other types of applications. So, that’s about where we stand with high-voltage.
Paul Oldham
Yes, I guess more broadly, what we said is that we still expected that semiconductor would be flat to up a little for the second half versus the first half. So, you can kind of take a look at the math there. But yes, I think bouncing around these levels, I think, is accurate.
If you look at that math, you’re probably flat or up a little bit in Q4. And look, as we’ve talked with our customers, I think they’ve generally said they expect business to be about flat as we look into 2024.
But at the same time, we’ve worked hard to be, I’ll say, financially prudent in terms of how we planned our business, but also be operationally prepared because we realize that when the semiconductor starts to turn, it can turn quickly and so we’re prepared if we see the business start to rebound more quickly over the course of next year.
Krish Sankar
Got it. Got it. That’s very helpful. And then a follow-up on Data Center. Obviously, the Data Center revenues grew nicely like 15% Q-o-Q, but it’s still down 22% on a year-over-year basis. I think, Steve, you mentioned as 1 hyperscaler customer is ramping for AI.
So, I’m just kind of curious, was the incremental $10 million revenue largely driven by that one customer? Are you sole-sourced? Or is it still like multi-sourced? And kind of like what is your strategy on a go-forward basis? Because a year ago, if I’m correct, maybe the terminology is too exaggerated, but you kind of deemphasize hyperscalers and focus on I&M? So, is there a new renewed focus on Data Center? Thank you.
Steve Kelley
Yes, that’s a good question and let me just — it’s a multipart question, so I’ll give you a multipart answer. So, first of all, yes, it’s a soft environment today from a demand standpoint and data center. But we do have this sole-sourced design win, which we touched on last call as well as this call, and that’s been ramping and has acted as a shock absorber basically. So, we’re not seeing the degree of correction that some others may be because of this ramping design win.
I think this is a cyclical market. We don’t know exactly when the demand is going to snap back. But if history is any guide, could snap back as soon as first half 2024. Because the last time we went through this inventory digestion, it took us about three quarters to get through it.
So, we’re ready for a snapback in the Data Center market. We think the fundamentals are great. Still a lot of data being generated and transmitted and stored. So, the long-term story is very strong.
We think there are a couple of accelerators next year, one is AI, of course. The second is the transition to 48 volts. So, we think there’s some positives on the horizon for Data Center, but our strategy remains unchanged.
We’re still going after opportunities where we can get paid for the engineering value that we provide. And so again, we’re trying to keep our margins going up and to the right, and we’re not as concerned about revenue growth in Data Center.
Krish Sankar
All right. Thanks a lot Steve. Appreciated.
Operator
Your next question is from the line of Steve Barger with KeyBanc Capital Markets. Please proceed with your question.
Steve Barger
Thanks. You talked about inventory being in good shape in the channel. But can you expand on your comment about having a more aggressive go-to-market strategy and tie that into the efforts to cultivate distribution and VAR relationships? It seems like that will be an important force multiplier if end markets do get a little bit weaker going forward.
Steve Kelley
Yes, Steve, I think we’ve done a lot on the go-to-market strategy. Let me just list some of the things that we’re doing that are, I think, most important. The first is probably our website. We launched the new website in August and it’s been a big hit with our customers and our distributors.
If we take a look at some of the statistics, today, we’re seeing roughly double number of hits on a daily basis on our website. And we’ve tripled the number of customers who are downloading and interacting with the website, typically downloading data sheets or application notes.
So, we’re very happy with that and then let me add the e-commerce capability next quarter. It does going to help us as a company, it’s also going to help our distributors as well and so that’s a big plus.
The second big thing we did was on the sales side, where we basically split our sales force into two parts and one of those parts is focused exclusively on Industrial and Medical.
So, those people, the apps engineers and the sales engineers only get paid on Industrial and Medical design wins and revenue. So, it’s been — its brought a tremendous amount of focus to our effort, not just through distributors, but also directly with customers. So, that’s been a big plus for the company.
And thirdly, I think we’ve raised our game in the marketing communications area and our ability to train our distributors and salesforce and how to sell our product and how they fit from a customer standpoint. So, I think we’re in much better shape than were two years ago.
Paul Oldham
I’ll just add to that, Steve. I think our prepared comments were such that we think the inventory and the distribution channel is about right, but we’ve actually seen more sell-through.
And you’re right, as market forces potentially weaken, getting broader reach is one of our primary strategies and the distribution channel is certainly a key part of that. And there’s even potential for us to expand further from a distribution channel perspective as we focused on that.
Steve Barger
Got it. Thanks. And Paul, backlog is down about 50% year-over-year to $514 million, which I think is at the high end of what you consider a more normal range. Can you talk through segment exposure in backlog, timing of delivery? And maybe talk through book-to-bill for semiconductor and Industrial and Medical?
Paul Oldham
Yes. So, you’re right, the backlog is down. Frankly, the backlog we had a year ago is extremely unusual. If you go back historically before the part shortages we saw, roughly 24 to 30 months ago, we would typically carry backlog that was 60% of quarterly revenue.
And that’s because a lot of our products are relatively short lead-times, and we have many customers who don’t technically give us orders. So, there’s not really a book-to-bill because we fill revenue through jet bins or through hub pulls.
And we’d expect to move back towards that situation, and that’s exactly what’s happening. I think by the end of this Q4, we’ll be back well within that $400 million to $500 million range. About $400 million is about a quarter’s worth of backlog.
That’s probably a quarter or quarter plus is kind of probably where things will run, probably a little more than they did historically. So, we think the contraction in backlog is pretty natural and it mainly just reflects those shorten lead-times and people returning to their normal ordering patterns.
From that perspective, if you look at what’s in backlog, the majority of it is relatively short orders now, I’d say, within a quarter-and-half or less. It’s also still heavily weighted towards Industrial and Medical and Semiconductor. And as we look forward, again, it’s hard to say a particular book-to-bill because many of our customers don’t order that way.
Steve Barger
Got it. Appreciate the detail. Thanks.
Operator
Our next question is from the line of Mehdi Hosseini with SIG. Please proceed with your question.
Mehdi Hosseini
Yes, thanks for taking my question. Paul, I just want to go back to the backlog. When I look at commentary by some of your customers in Industrial and Semi, it seems like they don’t really have a whole lot of visibility looking into calendar year 2024. And as such, could there be a scenario where your backlog would actually move towards the low end of that $400 million to $500 million band?
Paul Oldham
Yes, I think it could. Again, our estimate there is a little bit of a — based on market factors and where things could end up. Historically, we’ve run under that level and that would be normal.
So, I think as customers move back to more normalized patterns, we could certainly move towards the low end of that. That wouldn’t be a surprise. Again, that would still be about a quarter’s worth of backlog, which should be higher than the historical norm.
Mehdi Hosseini
Okay. And then just double-clicking on your semi business. If your customers are right now think — elaborate or talking about 2024 as a flat in terms of the system shipment or system revenue compared to 2023, does that imply that just some inventory refresh of components would lead to some growth in Advanced Energy’s Semiconductor business unit?
Steve Kelley
Yes, I think that’s a fair scenario, Mehdi. Like you said, the customer consensus seems to be that their end customer shipments will be roughly flat year-on-year. But we do see some room for growth in the jet bins and we see some room for growth in our new products as well. And that should push us into slight growth year-on-year.
Mehdi Hosseini
Yes, got it. Thank you.
Operator
Thank you. [Operator Instructions]
The next question is from the line of Mark Miller with Benchmark. Please proceed with your question.
Mark Miller
Thank you for the question. You talked about the implant was driving your high-voltage opportunity. In the last couple of weeks, there’s been concern about slowing in the EV market. EV sales in China this past quarter were down 27% sequentially. Are you seeing any slowing of quoting activity or orders as a result of this? Ford also delayed its capacity additions because of slowness.
Steve Kelley
Yes, Mark, the short answer is no, we have not seen that. So, right now, our backlog is still very robust, very strong. And we’re not getting any signals yet from our customers that they’re going to bring the forecast downward.
Mark Miller
Next question, Telecom, are any of your customers dealing with an inventory digestion situation?
Steve Kelley
And your question was specific to Telecom?
Mark Miller
Correct.
Steve Kelley
Or just in general?
Mark Miller
Just Telecom.
Steve Kelley
Just Telecom.
Paul Oldham
I’m not aware that they’re dealing with a lot of inventory, but it’s also clear if you look at the telecom manufacturers, they’re in a pretty severe down cycle right now. So, I don’t think there’s a lot of inventory overhang there, but also, there’s not a lot of orders.
It’s one of the reasons we talked in our prepared remarks about that we would anticipate that our Telecom and Network business is continuing to trend back towards a $30 million run rate versus where it’s ran the last — most of the last year.
Mark Miller
Thank you.
Operator
Thank you. The next question is from the line of Pavel Molchanov with Raymond James. Please proceed with your question.
Pavel Molchanov
Yes, thanks for taking the question. We’re talking about all of the macroeconomic headwinds in a lot of the verticals. But you also said that valuation prospective M&A are too expensive. From the perspective of the sellers who are insisting on these high-deal model, what are they looking at?
Steve Kelley
I can only comment for Advanced Energy. And I think valuations have adjusted over the past a year and a half. And I think different parties adjust the new valuation at different rates and I think that’s going to — I think the answer to your question is going to vary depending on which target we’re talking about.
But we think over the next six to 12 months, we’ll probably be able to come to a deal with one or more of these targets. But again, it’s going to depend on if it makes financial sense for Advanced Energy and strategic sense for the company.
Pavel Molchanov
Right. You also mentioned that for M&A, you’re looking for kind of chunkier deal sizes versus maybe what you would consider historically. If Artesyn was the largest M&A deal in the company’s history, compared to that, are you looking to do something even larger?
Steve Kelley
I think it’s one of our goalpost, I would say, SL Power would be the smallest kind of deal we would like to do in I&M and Artesyn would be the largest type of deal. So, it’s going to be somewhere in between those two goalposts.
Pavel Molchanov
Okay, that’s interesting. And lastly, within Industrial and Medical, I periodically ask this question, more and more headlines about new solar manufacturing, not just in the United States, but more broadly outside of China. Can you talk about your opportunities in that infrastructure build-out?
Steve Kelley
Yes, I think in solar, our primary opportunity is probably in the plasma space where many of these solar cells, solar panels need extremely precise thin layers of various things deposited on flat service. And this is an ideal type of application for plasma. And so we provide basically RF solutions for Intel manufacturers, which includes solar.
Pavel Molchanov
All right. Thanks very much.
Steve Kelley
Thank you.
Operator
Thank you. Ladies and gentlemen, this will conclude today’s — you may disconnect your lines at this time and thank you for your participation.
